Features and Benefits1. A various corrosive environments, salt spray, humidity, condensation, t
WhatsApp +86 13816217984
Email:info@qinsun-lab.com
1. A various corrosive environments, salt spray, humidity, condensation, temperature, with different cycle modes, such as the complex multi-step cycle of salt spray - high humidity - low humidity drying - static in SAE-J-2334 standard.
2. Cycle corrosion test device can precisely control environmental parameters, temperature can be accurate to ±0.5℃, humidity can be accurate to ±3%RH, salt spray concentration, spray amount, spray time can also be accurately controlled.
3. Through programming setting, each environment cycle switch and parameter adjustment can be completed automatically in order and time, without manual intervention, improving test efficiency and accuracy.
4. Long-term corrosion behavior and performance data of materials or products can be obtained in a relatively short time, speeding up the progress of research and development and quality inspection.
①Workroom |
|
②Spray tower |
|
③Refrigerating system | Composed of refrigeration compressor, condenser and evaporator, and accurately controls the temperature and humidity in the chamber. |
④Air circulation system | Keep the air circulation in the workroom, so that the temperature and humidity in the workroom and the salt spray remain uniform, and improve the accuracy of the detection. |
⑤Heating system |
|
⑥Humidity system | By heating the water to produce steam, and then the steam into the workroom, adjust the humidity in the tester. |
⑦Control system | Realize the function of parameter setting, operation control, data monitoring, test cycle procedures setting and recording of each system. |
⑧Saturated barrel |
|
⑨Salt solution tank | The prepared brine solution is stored and the stirring device mixes the brine solution evenly. |
⑩Air supply(option) | Provide compressed air for the test, atomize the brine solution to form a salt spray, and evenly spray the salt spray on the surface of the test sample. |
Model | STD SC-010 | STD SC-016 | STD SC-020 |
Internal dimensions (mm) | 1300*1000*600 | 1600*900*720 | 2000*1000*800 |
Overall dimensions (mm) | 2000*1300*1600 | 2300*1300*1700 | 2700*1300*1900 |
Interior Volume (L) | 780 | 1280 | 1800 |
Temperature Range | +10 ℃ ～ +90 ℃ | ||
Temperature Fluctuation | ± 0.5 ℃ | ||
Temperature Deviation | ± 2.0 ℃ | ||
Humidity Range | 30% ~ 98% RH | ||
Humidity Deviation | + 2%, - 3% | ||
Salt Fog Deposition | 1～2ml / 80cm2 · h | ||
Cooling system | Mechanical compression refrigeration system | ||
Humidifier | External isolation, stainless steel surface evaporation humidifier | ||
Water supply system | Water purification system | ||
Air Preheating | Saturated air barrel (31Liter) | ||
Spraying System | Atomizer tower and Spray nozzles | ||
Salt Fog Collected | Fog collector and fog measure cylinder | ||
Controller | Programmable color LCD touch screen controller, Ethernet connection | ||
Air Circulation | Centrifugal wind fan | ||
Safety Device | Humidifier Dry-combustion Protection; Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection | ||
Material | Glass fiber reinforced plastics | ||
Standard Configuration | 8 round bars | ||
Từ chối trách nhiệm: Nội dung trên chỉ dành cho tham khảo và giao tiếp giữa những người trong ngành và không đảm bảo tính chính xác hoặc đầy đủ của nó. Theo luật pháp và quy định có liên quan và các quy định của trang web này, các đơn vị hoặc cá nhân mua các mặt hàng liên quan phải có trình độ và điều kiện trình độ hợp lệ.
Điện thoại công ty
+86-21-6420 0566
Thời gian làm việc
Thứ Hai đến Thứ Sáu
Điện thoại di động:
13816217984
Email:
info@qinsun-lab.com
