Features and Benefits1. Upgraded glass fiber reinforced plastic material, strong corrosion resi
WhatsApp +86 13816217984
Email:info@qinsun-lab.com
1. Upgraded glass fiber reinforced plastic material, strong corrosion resistance, high temperature resistance, one molding, enhanced sealing, reinforced design, long service life.
2. A brine mixing system is installed in the brine tank to ensure the uniformity of the salt solution, and the brine can also be heated to stabilize the PH value.
3. Humidity control system and SO2 gas can be installed on the basis of the basic salt spray tank to simulate a more realistic and comprehensive salt spray environment, such as cyclic corrosion test chamber, salt fog and SO2 corrosion chamber.
4. Simulate a long-term marine climate environment in a short time, and multiple accelerated aging and corrosion experiments can be completed at one time, greatly shortening the product development cycle and test time.
①Workroom | Equipped with sample holder:
|
| ②Spray tower | The spray tower is adjustable in height and spray volume. |
| ③Heater strip | Controlling the power of the heating wire allows the workroom to reach the required test temperature. |
| ④Saturated barrel | The air is preheated in the saturated barrel. The saturated barrel has protection against dry burning. |
| ⑤Controller | The controller controls the spray time, temperature, humidity and other parameters. The controller also has fault diagnosis and alarm function. |
| ⑥Salt solution tank | Built-in 30 liter salt solution tank with a brine mixing system to keep the brine even. |
| ⑦Air supply(Option) | The air supply provides stable compressed air for the salt mist test chamber to ensure the normal operation of the spray system. |
Model | STD S-150 | STD S-250 | STD S-750 | STD S-010 |
Internal dimensions (mm) | 590*470*400 | 1000*640*500 | 1100*750*500 | 1000*1300*600 |
Overall dimensions (mm) | 1460*760*1140 | 1850*960*1350 | 1950*1030*1350 | 2000×1300×1600 |
Interior Volume (L) | 110 | 320 | 410 | 780 |
Temperature Range | Ambient ～ +60 ℃ | |||
Temperature Fluctuation | ± 0.5 ℃ | |||
Temperature Deviation | ± 2.0 ℃ | |||
Humidity Range | 95% ~ 98% RH | |||
Salt Fog Deposition | 1～2ml / 80cm2 · h | |||
Spray Type | Continuous / Periodic | |||
Salt Fog Collected | Fog collector and fog measure cylinder | |||
Air Preheating | Saturated air barrel | |||
Spraying System | Atomizer tower and Spray nozzles | |||
Controller | PID controller | |||
Safety Device | Humidifier Dry-combustion Protection; Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection | |||
Material | Glass fiber reinforced plastics | |||
Standard Configuration | 6 round bars and 5 V-shaped grooves | |||
Từ chối trách nhiệm: Nội dung trên chỉ dành cho tham khảo và giao tiếp giữa những người trong ngành và không đảm bảo tính chính xác hoặc đầy đủ của nó. Theo luật pháp và quy định có liên quan và các quy định của trang web này, các đơn vị hoặc cá nhân mua các mặt hàng liên quan phải có trình độ và điều kiện trình độ hợp lệ.
Điện thoại công ty
+86-21-6420 0566
Thời gian làm việc
Thứ Hai đến Thứ Sáu
Điện thoại di động:
13816217984
Email:
info@qinsun-lab.com
