Rupture strength tester - Qinsun
Professional Testing Instruments Manufacturer
Đường dây nóng tư vấn toàn quốc:+86 021-64208466

Rupture strength tester

Product introduction  Carton blasting machine is an international universal MULLEN (MULLEN) type ins

WhatsApp: +86 13816217984

Email: info@qinsun-lab.com

Nội dung

Standard

  • IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing
  • UL 61730: Safety Standard for Photovoltaic Modules
  • CE Certification (Conformité Européenne)

Product Advantages

  1. Ultra-Wide Pressure Range
    • 250–5,600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.
    • 0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.
  2. Precision Engineering
    • 5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.
    • Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.
  3. Safety First
    • Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5,600 kPa.
    • Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.
  4. User-Centric Design
    • 7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.
    • Voice-Guided Setup: Step-by-step audio prompts for operators.
  5. Data Integrity
    • Built-In Printer: Generates ISO 17025-compliant test certificates on-site.
    • SD Card Logging: Exports pressure-time curves for R&D analysis.

Product Features

  • Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.
  • Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.
  • Self-Calibrating System: Auto-tare and linearity checks before each test.
  • Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.
  • Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.

Technical Parameters

ParameterSpecification
Pressure Range250–5,600 kPa (36–812 psi)
Resolution0.01 kg/cm² (1.42 psi)
Holding Pressure5 kg/cm² (71 psi) adjustable
Air Source6 kg/cm² (87 psi) min (customer-provided)
Control Accuracy±1% FS (full scale)
Power Supply220V AC, 50/60Hz (single-phase)
Dimensions560mm (W) × 470mm (D) × 550mm (H)
Weight60 kg (net)

Accessories Included

  1. Testing Kit:
    • 1x Specialized Clamping Fixture (for 2–20 mm modules).
    • 2x High-Temperature Rubber Membranes (300°C rated).
    • 5x Aluminum Foil Calibration Discs.
  2. Consumables:
    • 1x 85% Glycerin Solution Bottle (for hydraulic calibration).
    • 10x Disposable Dust Filters.
  3. Documentation:
    • Multilingual Quick-Start Guide (printed + digital).
    • Compliance Certificates for IEC/UL Standards.
  4. Safety Gear:
    • 2x Safety Goggles (ANSI Z87.1 rated).
    • 1x Emergency Pressure Release Key.
 

Từ chối trách nhiệm: Nội dung trên chỉ dành cho tham khảo và giao tiếp giữa những người trong ngành và không đảm bảo tính chính xác hoặc đầy đủ của nó. Theo luật pháp và quy định có liên quan và các quy định của trang web này, các đơn vị hoặc cá nhân mua các mặt hàng liên quan phải có trình độ và điều kiện trình độ hợp lệ.


Tin nhắn trực tuyến

Chi tiết liên hệ

Điện thoại công ty

+86-21-6420 0566

Thời gian làm việc

Thứ Hai đến Thứ Sáu

Điện thoại di động:

13816217984

Email:

info@qinsun-lab.com

Mã QR